Glass And Hardware, In Plain Terms.

What the choices are, what each one changes, and where it costs more. We’ll go through them with you at the free design consult.

Crescent sliding glass door on a round stainless header, rolling past a fixed panel on a walk-in shower with a bench, gray plank tile and a handheld shower
Crescent slider on a walk-in shower with a bench

Clear or low-iron.

Both are tempered safety glass, in 3/8″ or 1/2″. Low-iron glass is also sold as Ultra Clear. The difference is how much of a green tint you see, which shows most on the edges and on large panels.

Clear vs. low-iron, in detail
Clear glass compared with low-iron glass
FeatureClearLow-iron
LookA slight green tintClearer, closer to colorless
EdgesGreen when you look at the edgeMuch lighter edge
CostThe standard choiceCosts more
Worth it whenDarker tile, a budget, or a simple updateLight tile, marble and stone, bright luxury baths
Two 1/2 inch glass samples side by side on a counter. The clear sample on the left has a bright green edge; the Ultra Clear low-iron sample on the right has a nearly colorless edge.
Clear on the left, Ultra Clear (low-iron) on the right. Illustration, not a job photo.

3/8″ or 1/2″.

Every enclosure except the sliders comes in either one. A door and panel is usually 3/8″. We recommend 1/2″ on larger showers, on panels over 40″, and on neo-angles and multi-panel layouts, especially when there’s no header across the top. It’s stiffer, and it looks nicer.

3/8 inch glass compared with 1/2 inch glass
Feature3/8″1/2″
UseThe usual choice for a door and panelLarger showers, panels over 40″, neo-angles and multi-panel layouts
LookA slimmer edgeA thicker edge that looks more substantial
SlidersCrescent and Cambridge sliders use 3/8″Not used on our sliders

Diamondize XP protective treatment.

Showcase offers Diamondize XP, a protective treatment for glass made by Diamond Seal Systems. We can apply it to your new shower glass panels at an additional cost, so ask for it when you request pricing.

What the manufacturer says

  • Makes glass easier to clean.
  • Diamond Seal Systems backs it with a limited lifetime warranty.

Product details and warranty are from Diamond Seal Systems.

Hinges, handles and clamps in a matching finish.

Hinges, handles, clamps and headers all come in one finish, so they match your faucet. These four are from our recent jobs. See every handle and finish swatch.

  • Frameless door and panel on a tiled knee wall beside a vanity, with a window inside the shower
    Polished chrome
  • Single frameless door on a shower with beige plank tile, a niche with a mosaic band and a hexagon stone floor
    Brushed nickel
  • Frameless door and panel shower with matte black hinges, botanical print wall tile and a corner bench
    Matte black
  • 90 degree corner shower with brushed gold hinges and handle, blue-gray glass tile and a knee wall
    Satin brass (brushed gold)

Hinges, headers and sliders.

The layout of your shower decides most of this. Here is what each piece does.

Hinges

Frameless swing doors hang on hinges. Wall-mount hinges screw into the wall. Wood studs behind the tile are preferred, but not required. Glass-to-glass hinges hang the door off a fixed panel. Hinges carry doors up to 40″ wide.

See the hinges guide

U-channel or clamps

Fixed panels sit in a U-channel or are held by glass clamps. A channel gives a slim, continuous line along the edge. Clamps leave more of the glass edge showing.

See the door & panel

Headers

A header is a bar across the top of the glass. Some wide layouts need one to carry the weight of the door and panels. We’ll tell you when we measure if yours does.

See the panel-door-panel

Sliders

Sliding doors roll along a header instead of swinging out. The Crescent uses a round header and large wheels. The Cambridge uses a double-sided stainless header with exposed wheels and no bottom track.

See the Cambridge slider

Textured, etched or lined.

For privacy or a bit of character. Each of these is from a job we installed. Obscured glass is still available in a couple of patterns, though fewer people choose it now.

  • Narrow single shower door in textured rain glass with matte black hinges and handle
    Rain glassTextured for privacy
  • Door and panel on a knee wall with custom etched mermaid and sea turtle artwork on the glass
    Etched artworkA custom design in the glass
  • Glass office with matte black grid lines and a barn-style sliding door
    Grid linesMatte black, on an office front

Common questions.

All questions
Should I choose 3/8″ or 1/2″ glass?

Both are tempered safety glass, and every enclosure except the sliders comes in either one. A door and panel is usually 3/8″. We recommend 1/2″ on larger showers, on panels over 40″, and on neo-angles and multi-panel layouts, especially when there’s no header across the top. It’s stiffer, and it looks nicer.

The Crescent and Cambridge sliders use 3/8″ glass.

Do you offer a protective treatment for the glass?

Yes. Showcase offers Diamondize XP, a protective treatment made by Diamond Seal Systems. The manufacturer says it makes the glass easier to clean. Diamond Seal Systems backs it with a limited lifetime warranty.

We can apply it to your new shower glass panels at an additional cost. Ask for it when you request pricing.

What affects the price?

The size of the opening, the glass thickness and type, how many panels there are, the hardware finish, and whether the layout needs a header, notches or a return panel. Photos and rough measurements let us narrow it down before we drive out.

How long does it take from measure to install?

Typically 2 to 2½ weeks from measure to install. Custom hardware finishes can take a little longer. We give you an install date when you approve the quote, and we’ll call you as soon as your glass is ready.

Showcase Shower Doors & More15+ years in the trade

Glass and hardware, side by side. We’ll show you the options.

Call or text us with questions about layouts, glass or timing. No sales pitch, just the team that would measure and install it.

Call 239-265-8545 Text us a photoOr request pricing online

Mon to Fri 8am to 5pm, Sat 9am to 3:30pm